

High Conversion Efficiency
200-Watt monocrystalline solar panel is with a higher conversion efficiency of up to 23.5% and can generate 200W max output solar power, enabling fast and quiet charging for your solar generators. Besides, the monocrystalline silicon solar panel is more durable and with a long using life.

Disasters

Power Shortage

RV camper

Outdoors Camping

Power all Devices Outdoors

Connect Multiple Solar Panels
Note: When connecting two pieces in series or parallel, the voltage of both pieces must be the same. If it is not the same, it may lead to product failure.







Model | EB-200P | USB-A QC 3.0 | 5V/3.4A 9V/2.5A 12V/2A |
---|---|---|---|
Peak Power | 200W | Type-C PD60W | 5V/3.4A 9V/3A 12V/3A 15V/3A 20V/3A |
Lamination | ETFE | DC Output | MC4 |
Cell Efficiency | 23.5% | Power Voltage | 18V/36V Switchable |
Size | Weight |
---|---|
![]() 23.8*21.3*2.2 inch |
![]() 11.7 lb |


Main Unit

MC4-DC5521 Anderson cable

3-in-1 3-type DC conversion plug for notebook PC/portable power supply

User Manual
FAQs


The actual output power will be affected by many factors such as weather, temperature, sunlight intensity, and the panel's angle. The 200W of power is the result under perfect conditions. So to get a higher output wattage, please use it under stronger sunlight, adjust the proper angle, and avoid the shadow.


Yes, it's 18V/36V switchable. You can adjust the output voltage of the solar panels to achieve a series or parallel connection.
Note: When connecting two pieces in series or parallel, the voltage of both pieces must be the same. If it is not the same, it may lead to product failure.


EENOUR EB-200P solar panels have a built-in MPPT controller, which can maximize the input power, and an MC4 cable, so that it can charge most power stations on the market.We recommend connecting 2 pieces of EB-200P to charge the EENOUR P2001 power station


Please use a soft cloth to remove the dust and dirt on the surface.
Customer reviews

Fully unfolded it is very large and can be quite cumbersome to deal with. There are support legs that are attached to the back of the panel with velcro that you can use to prop the panel up at the perfect angle, so it is pointing directly at the sun. The velcro is very strong so it takes quite a bit of effort to pull out the leg and the leg tends to want to spring back and reattach to the Velcro if you let it go. So setting it up can be a little annoying. Once you have the panel set up everything looks very secure. You can even set up the panel half folded so it will now act like a 100 watt panel.
Unlike many of these folding panels, this one doesn’t come with any accessories other than a set of MC4 cables that can attach to a solar generator or even a deep cycle battery via a charge controller. The junction box has many different USB ports, including one port that can output a whopping 60 watts of power.
Solar output is about on par with other solar panels that I’ve used which I kind of expected. In full direct sun I’m getting about 10 amps.
Folded up it’s not too big but at 11 pounds it's pretty heavy to haul a long distance. The carrying handle is not very comfortable to carry that kind of weight. I think more padding on the handle would help.
I think this would work well with an RV or boat. Way too heavy and bulky for backpacking.
It's advertised as waterproof and then you are told not to use it in the rain. Those statements seem to contradict each other. If it is not waterproof, then that is a significant con because a panel of this size produces useful power even when the sky is overcast/raining. Why not make it waterproof?

I tested the panel in September on a partially cloudy day at around 82F. I fed the panels into a Bluetti EB 3A solar generator which was at 80% charge. As a control, I used a Jackery 100-watt panel. As expected, this panel produces roughly twice as much wattage as the 100-watt Jackery panel, which means that given the same amount of sun your solar generator should charge twice as fast using this panel-that is a great thing.
This solar generator also has an 18-volt, 36-volt switch so you can increase the voltage output of the panels. This is important as some larger solar generators require a higher voltage to initiate their charge circuitry. This is the only portable panel that I have tested that does this, and it could be a very useful feature if you happened to have a solar generator that needed those requirements. There are also grommets so you can hang the panel if you wish.
There are a variety of USB ports so you can directly charge your devices. I usually recommend using these ports for charging small battery banks instead of electronics as the wattage output changes as clouds come in and out. Small battery banks are more tolerant of this than electronic devices like phones.
When folded this panel isn't much thicker than a 100-watt Jackery, so it won't take up more space.
So what are the drawbacks? To make the unit thin the backing material used is also thinner. It is unclear how it will withstand constant folding and unfolding. In general, 200-watt panels use 4 panels instead of two, so they are a bit more awkward to set up. It is also more difficult to get them flat as they tend to bend a bit more.
The biggest issue is that the unit only has MC4 connectors. These are common solar panel connectors, but they won't connect directly to most solar generators, you will need an adapter. I had to hunt around my patch cord "collection" to find one. and when I did, the unit performed as expected. However, this could be a hurdle for a person who just wants to plug and play a device. There are many folding solar panels that come with a variety of barrel adapters that easily adapt to whatever solar generator that you have. No extra purchases necessary.
There is an advantage to this unit as it is easy to connect multiple solar panels using MC4 adapters. You could buy two panels and have a fairly high output 400-watt system that you could easily store. I have 400 watts of solar on my van's roof (rigid glass panels) along with a large solar generator. With this setup, I'm able to run a small microwave and even an electric pressure cooker-so 400 watts is quite a bit of power.
These features may make it worth your while to buy this panel.
If this unit would have come with adapter plugs I would have given it 5 stars. However, the fact that the end user will need to buy extra adapters reduced my rating to three.


The zipper pouch was able to provide extra storage for additional cables. The cable connector junction box is in a zipper bag and also easy to reach and to connect external cables. The indicator light will provide signal if any of the connector is having issue.
I tried this solar panel early in the morning and I got the input reading around 15w from the power station and later it was the full sun and the reading went up to 73w. I was able to charge 3 Portable Power Stations simultaneously on MC-4 convert to DC5.5mm, 1 USB-C, and one QC 3.0 USB-A and their reading under the full sun was 71w on DC5.5mm, 58w on USB-C and 20w reading on QC3.0 all based on their input thresholds.
I like it’s compact folding size, 18v/36v switch with 200w output on the junction box, the 2×QC 3.0 USB-A , and 2×PD60W USB-C connectors and make this panel available to charge multiple devices or Power Stations at the same time and with its 200w output power, each device is able to be charged at its input capacity.

Fully unfolded it is very large and can be quite cumbersome to deal with. There are support legs that are attached to the back of the panel with velcro that you can use to prop the panel up at the perfect angle, so it is pointing directly at the sun. The velcro is very strong so it takes quite a bit of effort to pull out the leg and the leg tends to want to spring back and reattach to the Velcro if you let it go. So setting it up can be a little annoying. Once you have the panel set up everything looks very secure. You can even set up the panel half folded so it will now act like a 100 watt panel.
Unlike many of these folding panels, this one doesn’t come with any accessories other than a set of MC4 cables that can attach to a solar generator or even a deep cycle battery via a charge controller. The junction box has many different USB ports, including one port that can output a whopping 60 watts of power.
Solar output is about on par with other solar panels that I’ve used which I kind of expected. In full direct sun I’m getting about 10 amps.
Folded up it’s not too big but at 11 pounds it's pretty heavy to haul a long distance. The carrying handle is not very comfortable to carry that kind of weight. I think more padding on the handle would help.
I think this would work well with an RV or boat. Way too heavy and bulky for backpacking.
It's advertised as waterproof and then you are told not to use it in the rain. Those statements seem to contradict each other. If it is not waterproof, then that is a significant con because a panel of this size produces useful power even when the sky is overcast/raining. Why not make it waterproof?
I tested the panel in September on a partially cloudy day at around 82F. I fed the panels into a Bluetti EB 3A solar generator which was at 80% charge. As a control, I used a Jackery 100-watt panel. As expected, this panel produces roughly twice as much wattage as the 100-watt Jackery panel, which means that given the same amount of sun your solar generator should charge twice as fast using this panel-that is a great thing.
This solar generator also has an 18-volt, 36-volt switch so you can increase the voltage output of the panels. This is important as some larger solar generators require a higher voltage to initiate their charge circuitry. This is the only portable panel that I have tested that does this, and it could be a very useful feature if you happened to have a solar generator that needed those requirements. There are also grommets so you can hang the panel if you wish.
There are a variety of USB ports so you can directly charge your devices. I usually recommend using these ports for charging small battery banks instead of electronics as the wattage output changes as clouds come in and out. Small battery banks are more tolerant of this than electronic devices like phones.
When folded this panel isn't much thicker than a 100-watt Jackery, so it won't take up more space.
So what are the drawbacks? To make the unit thin the backing material used is also thinner. It is unclear how it will withstand constant folding and unfolding. In general, 200-watt panels use 4 panels instead of two, so they are a bit more awkward to set up. It is also more difficult to get them flat as they tend to bend a bit more.
The biggest issue is that the unit only has MC4 connectors. These are common solar panel connectors, but they won't connect directly to most solar generators, you will need an adapter. I had to hunt around my patch cord "collection" to find one. and when I did, the unit performed as expected. However, this could be a hurdle for a person who just wants to plug and play a device. There are many folding solar panels that come with a variety of barrel adapters that easily adapt to whatever solar generator that you have. No extra purchases necessary.
There is an advantage to this unit as it is easy to connect multiple solar panels using MC4 adapters. You could buy two panels and have a fairly high output 400-watt system that you could easily store. I have 400 watts of solar on my van's roof (rigid glass panels) along with a large solar generator. With this setup, I'm able to run a small microwave and even an electric pressure cooker-so 400 watts is quite a bit of power.
These features may make it worth your while to buy this panel.
If this unit would have come with adapter plugs I would have given it 5 stars. However, the fact that the end user will need to buy extra adapters reduced my rating to three.
The zipper pouch was able to provide extra storage for additional cables. The cable connector junction box is in a zipper bag and also easy to reach and to connect external cables. The indicator light will provide signal if any of the connector is having issue.
I tried this solar panel early in the morning and I got the input reading around 15w from the power station and later it was the full sun and the reading went up to 73w. I was able to charge 3 Portable Power Stations simultaneously on MC-4 convert to DC5.5mm, 1 USB-C, and one QC 3.0 USB-A and their reading under the full sun was 71w on DC5.5mm, 58w on USB-C and 20w reading on QC3.0 all based on their input thresholds.
I like it’s compact folding size, 18v/36v switch with 200w output on the junction box, the 2×QC 3.0 USB-A , and 2×PD60W USB-C connectors and make this panel available to charge multiple devices or Power Stations at the same time and with its 200w output power, each device is able to be charged at its input capacity.